2022의 게시물 표시

케이세다 2021 시타 스트링 (블레이드 H)

[Blade H-1] - 51/50 - 평범한 파워, 컨트롤. 팔에도 크게 부담 없었음. - 인위적인 스핀이 거의 없다고 느껴짐. - 텐션이 조금 낮아지면 홀드감이 좋아지나 스핀은 여전히 부족한 느낌이었음. - 내구성 좋음. 텐션의 급격한 변화도 안 느껴졌음. - 제품 소개에 나온 특징에 전반적으로 동의. - 케이세다의 각종 하이브리드 구성의 특징을 비교하기 위한 기본 줄 조합으로 아주 괜찮음. 본인만의 감각을 찾아가는 단계의 초보자나, 오버하지 않는 정직한 특징의 스트링을 선호한다면 추전. [Blade H-4] - 51/50 - 줄 매기 어려운 사각 줄. 신경써서 잘 풀어서 매지 않으면 불규칙하게 꼬일 수 있음. - H-1 대비 확실히 스핀 많아짐. 스핀 땜에 당연히 공이 짧아지는데 파워도 함께 조금 줄어들었는지 생각보다 더 짧아짐. - 너무 빠른 스윙 시 정확성이 다소 떨어짐. 발사각도 편차가 조금 크게 느껴졌음. 제품 소개에 나온 특징에는 우수한 컨트롤이 장점이라 되어 있는데.. 사용자의 실력이 문제인 듯. - 스윙 속도가 적절히 낮으면 홀드감도 나쁘지 않고 발사 각도, 방향도 나름 제어할 수 있었음. 적응이 좀 필요함. - 4각 줄이다 보니 한쪽 면 전체가 크로스 스트링에 닿는데, 그래서인지 텐션이 급격히 떨어짐. - 느린 스윙 스피드에서 강한 스핀을 원하면 시도해 볼만 함. [Blade H-6] - 51/50 - H-1 대비 회전량만 적당히 많아진 듯한 느낌. 회전량 만큼 공은 짧아지지만 파워 면에서 이질감도 적고 발사각도 제어가 의외로 잘 되어 충분히 보완할 수 있었음. - 처음엔 M-6가 조금 단단하다 느껴졌는데, 느낌과는 달리 팔에 부담이 가지는 않았고 텐션 감소도 급격하지 않았음. 신기하게 M-6의 각이 끝까지 잘 살아있었음. - 개인적으로 가장 맘에 들었던 조합임. [Blade H-7] - 51/50 - H-6와 비슷할 거라 예상했으나 의외로 H-4 처럼 적응하는 데 고생했음. - M-6가 살짝 무르다는 느낌이 있었는데, 그 때문인지 거리 조

Running KataGo/KaTrain on Jetson AGX Xavier

Set-up Jetson AGX Xavier From Ubuntu 20.04, use sdkmanager and follow instructions Temporarily modify VERSION_ID in /etc/os-release from 20.04 to 18.04 Preparation-CMake (on Jetson) KataGo requires version 3.18.2 or higher, but the default wa 3.10.2, hence build from source. Download CMake source file then install at /usr/local/CMake git clone https://github.com/Kitware/CMake ./bootstrap --prefix=/usr/local/CMake make sudo make install Preparation-KataGo v1.10.0 (on Jetson) Refer github.com/lightvector/KataGo/blob/master/Compiling.md#linux For CMake, refer Preparation-CMake (on Jetson) above. Check all packages are installed or updated, including zlib1g-dev, libzip-dev, libgoogle-perftools-dev, libssl-dev, and ocl-icd-opencl-dev. Build KataGo git clone https://github.com/lightvector/KataGo.git git checkout v1.10.0 cd KataGo/cpp /usr/local/CMake/cmake . -DUSE_BACKEND=CUDA -DUSE_TCMALLOC=1 [Note] Selecting TensorRT backend(TENSORRT) will give check error. "TensorRT 8.2 or greater is

Install Ubuntu 20.04 LTS on HP Pavilion Desktop

- Download Ubuntu 20.04 LTS iso for Desktop - Prepare bootable media (USB Stick or CD/DVD) - Shrink Windows Partition for extra space - Change BIOS Settings - Disable Secure Boot - (No option for fast boot) - Change boot order - Boot with prepared media (USB Stick or CD/DVD) - [Problem] May not pass the logo screen. (hangs forever) - At the grub screen, press 'e' then add 'pci=noacpi' option before '---' (after 'splash') - Continue installation - [Problem] May face grub installation failure, with 'Operation not permitted' message. - In this case, just follow the instruction to boot into the Live session (the same as 'Try Ubuntu') - Install and use boot-repair to try fixing the problem. But again, may face error saying file /boot/grub/x86_64-efi/normal.mod not found error. - Boot into the Live session again, then open terminal and use following lines of code to install grub again. (/dev/nvme0n1p1 is the EFI partition, /dev/nvme0n1p